Time Touch Take System - Complete Setup Instructions

Step 1: Unboxing Your Time Touch Take System

1. Handle with care: When your system is delivered, avoid dropping or shaking the box.

2. Open the package: Place the box on a flat, stable surface such as a table before opening it.

3. Remove the system: Carefully lift the Time Touch Take unit out of the box and set it on the table.

4. Unpack the bottles: Open the bottle box included in the package and place each bottle on the table.

5. Optional cleaning: The bottles are dishwasher safe. You may hand wash them or clean them in the dishwasher before use.

Step 1: Unboxing

Step 2: Placing Medication in the Bottles

1. The system includes four color-coded silos:

  • Red – Morning
  • Orange – Lunch
  • Green – Evening
  • Blue – Bedtime

2. Place the correct medications into the corresponding bottles.

3. Before loading: Always read each medication label carefully to confirm the correct drug, dosage, and timing.

4. Double-check that all medications are in the correct color-coded bottles.

Disclaimer: Time Touch Take LLC is not responsible for any errors in medication placement. All responsibility lies with the caregiver or system owner.

Step 2: Placing Medication

Step 3: Powering On Your System

To power on the system: Plug the power cord into the small socket on the back of the Time Touch Take device, then connect the other end to a wall outlet. Once fully charged, the system includes a built-in 24-hour backup battery that allows it to operate without being plugged in.

Step 3: Powering On

Step 4: Downloading and Connecting the App

1. Download the app:

  • iPhone users: Open the Apple App Store.
  • Android users: Open the Google Play Store.
  • Search for "Time Touch Take" and download the app.

2. Open the app and select "Search for Devices."

3. When your device appears (starting with "TTT" and your serial number), select it to connect.

4. The app will display "Connected" once pairing is successful.

Step 4: App Connection

Step 5: Entering Your Information

1. Follow the on-screen prompts in the app.

2. Enter the required information:

  • Full Name
  • Address
  • Phone Number
  • Email Address

3. Review all information carefully before saving.

Step 5: Enter Information

Step 6: Adding Caregivers

1. You may add up to three caregivers.

2. For each caregiver, enter:

  • Full Name
  • Email Address
  • Phone Number

3. Review all caregiver information for accuracy before saving.

Caregivers will receive notifications and updates through the contact information provided.

Step 6: Add Caregivers

Step 7: Setting Medication Times

1. Open the app and navigate to the Medication Schedule section.

2. Set the times for each medication dose according to your prescription.

  • Example schedule: 8:00 AM, 11:00 AM, 3:00 PM, 7:00 PM.

3. Timing rule: Medications should not be taken two hours before or after the scheduled time.

4. Press "Save" once all times are set.

5. If only taking medication twice a day, unset unused silos and press "Save."

Note: Medication times should only be changed if updated by a healthcare provider.

Step 7: Set Medication Times

Step 8: Patient Responsibility

1. Listen to the alarm: The system will sound an alarm when it's time to take medication.

2. Respond promptly: Press the red button that is buzzing.

3. Retrieve your medication: The corresponding bottle will drop.

4. Take your medication: Open the bottle and take the prescribed dose.

The system is a reminder and dispensing aid but does not replace the caregiver's or patient's responsibility to take medications correctly.

Step 8: Patient Responsibility

Step 9: If Medication Is Not Taken

1. If a dose is missed, up to three caregivers will be notified via email and SMS text message.

2. Caregivers have 30 minutes to respond and contact the patient.

3. If medication is not taken after 30 minutes, the system locks and cannot be reopened until the next scheduled dose.

This feature alerts caregivers to ensure patient safety, but the patient and caregiver remain fully responsible for timely medication administration.

Step 9: Missed Dose Warning

Step 10: LED Lights Message

1. Solid Red – Wall powered; Blinking Red – Battery powered; No Red – Battery dead and no power.

2. Yellow – Previously had bottle problems, like a jam; No Yellow – No recent problems.

3. Green – Will dispense at the next alarm.

4. No Green – Will not dispense at the next alarm or no alarms set.

Step 10: LED Lights Guide